FIBER OPTIC ACCESSORIES
MPO Harness (3-25m)
ㆍ Eliminate termination errors, Min installation time.
ㆍEach cable is 100% tested for low insertion loss and back reflection.
ㆍ Optimized performance – Elite MPO and discrete premium connector.
Suitable for MPO application
ㆍSupport 40GBASE-SR4 in applicable parallel optics networks.
ㆍ Compliant to IEC-61754-7 and TIA-604-5(FOCIS-5) standard.
ㆍ Telcordia GR-1435-CORE, and RoHS
ㆍLSZH Jacket by Default
ㆍMeet the standards of TIA/EIA and IEC.
ㆍFiber Types: OS2 G652D, G.657A1, 50/125 OM3, OM4, OM5
ㆍ Jacket standard colors: OS2 and G.657A1 yellow, OM3 and OM4 Aqua,
OM5 Lime Green
ㆍ Connectors: 12 x Fiber Ferrule MPO/MTP connector female (Un-pinned)
or male (Pinned)
ㆍCable cores:24, 48, 72, 96, 144 cores Micro-Cable versions available
ㆍ Jacket materials: LSZH, OFNP (Plenum), OFNR (Riser)
ㆍHigh Density Up to 144x Fibers in one cable
ㆍPulling eyes and reel types optional
ㆍ Fast Deployment: Modular cables and cassettes, make deployment
and maintenance easier work
ㆍ Data Centers with High Density Requirement.
ㆍFiber Channel Storage.
ㆍParallel Processing Applications.
ㆍTelecommunications and Backbone Installations.
MPO/MTP Fiber Loopbacks is designed to provide a media of return patch for a fiber optic signal. Typically it is used for fiber optic
testing applications or network restorations. For the testing applications, the loopback signal is used for diagnosing a problem. Sending a
loopback test to network equipment, one at a time, is a technique for isolating a problem.
MPO/MTP to LC harness cables are used to fan out the 12-24 core MPO fibers into generic connectors, typical optical fiber types
are single mode OS2, multimode OM2, OM3, OM4. The MPO/MTP to LC harness cables can be made with 2mm or 3mm ruggedized furcation
legs in customized length, this will hep make it more rugged.